Thanks Al, I think i tried that but will make sure. I considered changing those caps in the tuner just for a try. Gary CHAMBERS TV BRADENTON,FL SINCE 1982 ----- Original Message ----- From: al m <ampm@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, January 10, 2002 8:05 AM Subject: [TechAssist] Re: rca ctc 135 tuner problem > > is this the mttooi unit with only one box. if it is i fixed one about a year > ago. if you take the top cover off there's a large cap sort of in the right > hand corner. when the tuner comes back on hit it with freeze spray. it fixed > mine.not sure what the # or value was. > al marquardt > ampm@xxxxxxx > ----- Original Message ----- > From: "GARY AND JUANITA CHAMBERS" <gchambe3@xxxxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, January 09, 2002 4:58 PM > Subject: [TechAssist] rca ctc 135 tuner problem > > > > I have a rca ctc135 that comes on cold with only a blank raster and on > screen display.will not auto program when cold either, just skips all > channels. > > after 30 to 45 seconds,tuner pops in and will program etc. must be off at > least 10 minutes to fail again. > > i allready resoldered the tuner control module,same trouble. > > i also replaced the caps in scan derived lines.same. > > cant seem to find any voltages that change during this problem. > > any one got an idea? > > gary > > CHAMBERS TV > > BRADENTON,FL > > SINCE 1982 > > > > ------------------------------------------ > > Help make your TechAssist database better! > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > > > > > > ------------------------------------------ > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.