[TechAssist] Re: ptv 835 no high voltage has sound
- From: peggs <peggs@xxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx, <techassist@xxxxxxxxxxxxx>
- Date: Sat, 05 Nov 2005 10:06:24 -0800
I think this is one of the sets with the Power Supply Opto and Controller
that goes bad.
7402,7412,even 7410 I believe.
Is the HOT 130v source up ???
You can check for it on one of the Interconnencting plugs in the middle
Peggs
At 04:12 PM 11/4/05, pete wrote:
>I went to this house 2 days ago. the problem was a dead set no standby
>found c924 2 kv cap blown up replaced it. set worked. cust called me back
>2 days later went back now the set turns on and has audio but no high
>voltage has anybody seen this. I have b plus on both q 906 and q802. no
>drive on base of either q906 or q 802 any help would be greatly appreciated
>thank you
>Pete
>Perdomo Tv Inc Since 1972
>Miami.Fl
>-----------------------------------------------------------------------------
>This Email List is accessible to the general public through search
>engines. Remove: http://www.tech-assist.org/remove.htm
>Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
>Lost Password: http://www.tech-assist.org and select "Login Problems?".
>Email Archives: //www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
This Email List is accessible to the general public through search engines.
Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
