Not a good address Jeff. -Ed- > > Gary's correct, > A lot of the guys on here are wonderful. I've had a few PTV's give me the > fits and the guys have gone above and beyond the call of duty. > It helps to have a good tip program to help. Some of these use the same > chassis, so searching by chassis number yields most results. > You can find one here: www.tech-repair.net > > Jeff > > FAX 1-413-280-0677 > Jeff Dougherty > Intrepid Video & Electronics > 501 Luther Rd > Harrisburg, PA 17111 > 717-909-8844 > VCR tips, electronics info & general interest. > www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com > > > ----- Original Message ----- > From: "Gary McCartney" <number63@xxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, February 01, 2002 1:37 AM > Subject: [TechAssist] Re: projection TV > > >> >> Gaetan, I'm not sure if there are any sites devoted to PTV, but the rest >> of us on the list who have worked on them are here to help. I myself >> have only done a handful of PTV, and I found that being I started with >> an RCA CTC169 set, that really helped a lot because it is so very >> similar to the direct view CTC169 chassis. Main difference is in the >> High Voltage splitter, convergance board, and the CRT's. Also it would >> be nice if you can start with a set that you can remove the "light box", >> which means that the complete chassis is built into a particle board box >> and can be removed easily from the TV cabinet so it can be taken back to >> your shop. The CTC169 PTV chassis is a good example of this. >> >> >> >> >> Gary McCartney >> >> McCartney Electronics >> 7134 Fife Rd, RR 7 >> Guelph Ontario Canada N1H 6J4 >> Fax: (519)821-1530 >> email: number63@xxxxxxxxxxxxx >> >> >> >> >> >> Gaetan wrote: >>> >>> Hi list ! >>> >>> Is there a good place on the net (web pages) or .doc , about PTV ? >>> a kind of crash course , or the basics of . >>> >>> I didn't service any of those yet , but looking ahead ...... >>> some people call , or start asking me some questions on that .... >>> i'm sure pretty soon, I will have to service a few ! and i'm pretty >>> ignorant on this subject :( >>> I do get an apercue , but ..... >>> thks for any help >>> >>> Gaetan Bourgouin >>> Techno Logik >>> Terrebonne PQ CA >>> >>> ------------------------------------------ >>> Make your TechAssist database better! >>> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >>> ------------------------------------------ >>> To UNSUBSCRIBE your email address, click here: >>> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >>> Or send a BLANK email with unsubscribe in the >>> SUBJECT field to the address above. >> >> -- >> ------------------------------------------ >> Make your TechAssist database better! >> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >> ------------------------------------------ >> To UNSUBSCRIBE your email address, click here: >> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >> Or send a BLANK email with unsubscribe in the >> SUBJECT field to the address above. >> > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > -- From: Ed Gaidies teltek@xxxxxxxxxxx Tel-Tek Electronics ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.