Sounds like the deck micro is confused, but make sure the unit is not is some sort of function lock mode. Assuming you have the original remote, some of them had a vcr1, vcr2 select. Either way, try holding the power or vr1, vcr2 button down for at least 10 seconds. If that doesnt bring any results, check the deck mechanism. A malfuntioning mode switch can confuse the micro and a broken pin on the die-cast function lever under the cam gear can cause other problems. There are other possibilities but most of them are nasty and difficult to diagnose. Jerry Silverman Greentron Inc 4 Newland Ave Greenville SC 29609 864 232 3889 Fax 271 2080 mailto:greentron@xxxxxxx ----- Original Message ----- From: <HSWAD@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, February 07, 2002 12:37 PM Subject: [TechAssist] (no subject) > > here is one for you: RCA model T19060GY, Chassis TVCR2/2B. when plugged into > AC set comes on immediately. Has Video and sound but no pushbuttons work at > all. Remote has no effect. It tape is inserted it will load it but not play > or eject it. Help please. Hollis Bates, Lewiston, Maine > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.