Check all resistors around the flyback. The one feeding the vertical circuit may be open. Kevin Wilks Kevin's TV & Video Repair Penticton BC Canada kevintv@xxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of s ziegmann Sent: Wednesday, September 22, 2004 6:12 PM To: freelist techassist Subject: [TechAssist] mits vs-50603 vertical melt down set came in dead replace h.o trans 34 volt diode. turn on the set puff of smoke came out of the vertical section. had e cap leaking replace cap&the output the set shuts down now any have clue or any body up load the vertical section thanks steve @ajs tv ===== Steve AJ'S TV SAT &VCR LAKE VIEW . IA ajs@xxxxxxxxxxxxxxx __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ------------------------------------------------------------------------ ----- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/