Jim, Check tape end sensors in VCR circuit, had a CCZ134AT01 with same symptoms and this cured the problem. Dan Webster Webster's TV Shullsburg, Wi. ----- Original Message ----- From: <BIgJimStJohn@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, May 28, 2002 12:58 PM Subject: [TechAssist] magnavox cca132at no control of function > > tape was originally stuck ,manually removed it, set will not turn on at front > panel or by remote tape will load and play till the end ,then eject , > all function buttons do not operate baffled jim Paul's tv thanks > bigjimstjohn@xxxxxxx > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/