I have heard good reports about spray varnish,or brushing on varnish and let it get hard for a few days,seems to be important that coils get soaked.I bombed out once on silicon caulk,didn't work. al Al Leatherman alleathe@xxxxxxxxxxxxx 973-361-5796 Mine Hill, NJ. 07803 http://WWW.ALS-TV.NET ----- Original Message ----- From: <MYERSVCR@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, October 19, 2002 5:06 AM Subject: [TechAssist] magnavox 25G1 yoke noisy > > Repaired this unit by simply resoldering most of the board. It came > with no picture and a noisy, chattering yoke. Set now works but yoke still > chatters. I have read various tips ranging from 'use fingernail polish' on > yoke windings to armature sealant to hot melt > I am considering cleaning it and using a standard hot glue gun. Anyone > know what is causing the noise and the best fix? Craig > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/