Thanks to all who responded. The dew sensor was the culprit. al marquardt ampm@xxxxxxx > From: "al m" <ampm@xxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Tuesday, October 15, 2002 1:11 PM > Subject: [TechAssist] ifisher vcr FvH_810 > > > > > > It's an old one. When you plug it in the stop light just keeps blinking. > > Won't take tape. The capstan turns when first plugged in as well as the > reel > > but the head doesn't move ,not sure if it is supposed to or not . Anybody > > have any ideas ? Would a bad mode switch do this. > > al marquardt > > ampm@xxxxxxx > > > > > > > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > To CHANGE your email address, click here: > > http://www.techassist.net/forms/change.html > > ------------------------------------------ > > ***NEW*** Tips Added Instantly!!!*** > > Submit Repair Tips here: > > http://www.tech-assist.org/secure/tip/ > > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/