Hello Everyone. I am working on a ctc203ax. There is no data activity on micro. 5volts is present,the 4mhz crystal is running. I shorted Q104 c to e to force u 104 on. With pins 3&4 lifted on micro I get the 5 volts on lines 3 &4 to micro. When re-soldered, voltage drops to less than 1v. I also have 5v on pin 8 of u 102. I suspect the micro is bad. Any advice would be appreciated . Merry Christmas & Happy new year! Don's Electronics Rosthern,Sask Canada ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/