Parameter 25 is the important one for sound. The range is 0 to 15 and it should be around 9. If it is high, you will have no sound. John. John Mielke Main TV Longmont, Co 303 776 6955 ----- Original Message ----- From: "D Trippel" <dtrippel@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, September 29, 2005 3:05 PM Subject: [TechAssist] ctc186a no audio > Hello Everyone > > I am working on a ctc186a with no sound. The speakers are turned on in > customer menu. I removed Q1903 still no sound.I checked parameters in > set up. 20-00 22 -00 23-00 24-28 .What are the correct setting? Or do > I have a diffent problem. There is no audio present at the audio out put > jackes as well. I checked r1617 it is 100 ohm. Thanks!! > > Don Trippel > Don's Electronics > Rosthern,Sask > Canada > > -------------------------------------------------------------------------- --- > This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/