[TechAssist] ctc177ar2
- From: "Rs Tek Inc" <rstek@xxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 3 May 2002 17:14:25 -0400
Im looking for the value of R4110 in the power supply maked on board as R110.
It looks like 110ohm but it reads at 35k. I tried a 110ohm and it fried. Hot
is ok. I have 135v at collector of hot with old resistor. Problem is that the
pic is pulled in on sides. Replaced the suspect caps and diodes. The resistor
in question is definently heated. ANy help would be appreciated.
Frank
Rs-Tek Inc
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
