You could try replacing R4143 and R4144. Also Q4111 in power supply might be open. Gary McCartney McCartney Electronics Guelph Ontario Canada Est. 1984 email: gary (at) number63.ca pete wrote: > I have been stumpt on this one. 120 volts on horiz output transistor in > standby. cr4118 has been replaced I dont have 15 volts on diode I cannot > measure it fluctuates c4145 1000 micro 50 volts have been also replaced raw > bplus is 160v on the money I have replaced c102,c108.c104 u101, and > disconnected the audio. Any help will be greatly appreciated > Pete > > Perdomo Tv Inc Since 1972 > Miami.Fl > ----------------------------------------------------------------------------- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/