Gary, Don't know if this will help you or not, I've had a few CTC120's & CTC 130's with this problem you are discribing . The problem was a filter in the tuner module. Filter # is C676(100m-10v) in the 120's & 130's. Dan Webster Webster's TV Shullsburg, Wi. ----- Original Message ----- From: Jeff Dougherty <jeff@xxxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, January 10, 2002 6:27 PM Subject: [TechAssist] Re: ctc135 rca tuner problem > > Gary, > Make sure you didn't miss the ground connections in the corner near all the > connectors. > > Jeff > > FAX 1-413-280-0677 > Intrepid Video & Electronics > 501 Luther Rd > Harrisburg, PA 17111 > 717-909-8844 > mailto:Jeff@xxxxxxxxxxxxxxxxxx www.9-11-2001tragedy.com > www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com > ----- Original Message ----- > From: "GARY AND JUANITA CHAMBERS" <gchambe3@xxxxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, January 09, 2002 8:26 PM > Subject: [TechAssist] ctc135 rca tuner problem > > > > I have a rca ctc135 that comes on cold with only a blank raster and on > screen display.will not auto program when cold either, just skips all > channels. > > after 30 to 45 seconds,tuner pops in and will program etc. must be off at > least 10 minutes to fail again. > > i allready resoldered the tuner control module,same trouble. > > i also replaced the caps in scan derived lines.same. > > cant seem to find any voltages that change during this problem. > > any one got an idea? > > gary > > CHAMBERS TV > > BRADENTON,FL > > SINCE 1982 > > > > ------------------------------------------ > > Help make your TechAssist database better! > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > > > ------------------------------------------ > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.