Bob, What's your voltage on pin 1 of U4101? If you're missing the -40v on pin 1 you may need to replace STR730-010. Have you checked R4104, right next to the large filter cap, it's common for that to open. Also check R4702 and R4517, and the solder connections on T402. Just for some blind suggestions. Hope this helps. Bill Premium Technologies Ocean Park, WA. 98640 Phone: (360) 665-5984 Fax: (605) 253-4530 email: premtech@xxxxxxxxxxxxxx ----- Original Message ----- From: "Robert Cuppett" <cguidance@xxxxxxxxxxxxx> To: "techassist" <techassist@xxxxxxxxxxxxx> Sent: Tuesday, October 16, 2001 12:53 AM Subject: [TechAssist] ctc 177-RCA - DEAD > > > Got a dead set - RCA F25215WT - Fuse o'k - horz. output o'k... no schematic > - any help appreciated! Bob Robert Cuppett 1127 W. Alton St. Wilmington, > CA 90744 (310) 835-7108 > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/