Hello everyone I'm working on a ctc 169ha. The osd appears to be out of sync. (just horizontal lines) I replaced cr 4118 and c 4145. The voltages on Q4702 and Q4703 are normal. The voltage on pin19 of U10001 is only 2.65v my schematic shows it should be 4.85v I lifted pin 19 ,no change. r2908 and r3331 are good . the voltage on pin 21 of u3101 is 4.7v c3317 is also good. I have spent alot of time on this one, but I am not sure where else to look. Any help would be greatly appreciated. Thanks! Don Trippel Don's electronics Rosthern , Sask Canada 306-232-5346 ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/