Ron, Sorry no print, but I would try another vert output... Bob. Bob's TV Worcester, ma woodman17@xxxxxxxxxxx ----- Original Message ----- From: "Ron Miller d.b.a. Country TV" <rlmbkm@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, May 19, 2005 1:42 PM Subject: [TechAssist] Zenith sg2713h9 vert won't fill screen. 9-822 & 9-958 > Have about 1/3rd of vert sweep. > What I have changed: cx2110.c2104.cx2105.c2108.cx2109 also cr2101 and > ic2100 (vert output la7836). > Three of the caps checked bad. > Below are the voltage readings on IC2100. > Pin1. 11.3vdc > Pin2. 8.0 vdc > Pin3. 5.7 vdc > Pin4. 0 > Pin5. 5.8 vdc > Pin.6. 5.1 vdc > Pin.7. 28.7 vdc > Pin8. 0.6 vdc > Pin9. 1.6 vdc > Pin10. 0 > Pin11. 12 vdc > Pin12. 23.5 vdc > Pin13. 4.8 vdc > IC heatsink is warm but not hot to the touch, > anyone have a print to check these voltage readings, tips on scan of vert > section?TIA > Country TV > Ron Miller > Inez, TX. 77968 > > -------------------------------------------------------------------------- --- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/