[TechAssist] Re: Zenith projection model PVY5265RK- poor convergence

  • From: Tonys TV <tonys.tv@xxxxxxx>
  • To: techassist@xxxxxxxxxxxxx
  • Date: Fri, 31 Jan 2003 17:21:11 -0800

Hello
The convergence menu is accessed by holding the Menu button on the remote
until
the box in the top right corner appears, then press 999 Enter. This should
access
the convergence set-up menu. Hope this helps.
Don.

----- Original Message -----
From: <Ttkirkpat@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, January 31, 2003 5:05 PM
Subject: [TechAssist] Zenith projection model PVY5265RK- poor convergence


> Set was dead, replaced flyback, hot and CRX3412 diode. Set now works
however
> convergence is poor on outer edges, particularly the red. I replaced the
> convergence ic's and checked all the resistors which are good. 2
questions.
> #1- somewhere I believe I read that something would get damaged in the
> convergence circuit in conjunction with the above repair ??! Or #2, how do
> you access the memory for touching up the convergence on the outer edges?
> Pushing Menu 9876 will get you into the other factory settings but none of
> these relate to convergence. Thanks to my helper from Mike at the Video
> Center. My e-mail is ttkirkpat@xxxxxxx
>
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
>   http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
>   http://www.techassist.net/forms/change.html
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.449 / Virus Database: 251 - Release Date: 1/27/2003

------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
  http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
  http://www.techassist.net/forms/change.html

Other related posts: