[TechAssist] Re: Zenith model SJ2724N5 9-1132 module
- From: "Tel-Tek Electronics" <teltek@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 14 Feb 2002 16:26:20 -0500
Doyle;
If you believe it's the 12K resitor, change it.
Then.. if that doesn't solve your problem.......Repost.
-Ed-
teltek@xxxxxxxxxxx
TEL-TEK ELECTRONICS.
----- Original Message -----
From: "Tranbarger Electronics" <dtran@xxxxxxxxxxxx>
To: <TechAssist@xxxxxxxxxxxxx>
Sent: Thursday, February 14, 2002 6:13 PM
Subject: [TechAssist] Zenith model SJ2724N5 9-1132 module
>
> Hello guys,
>
> This set has a very dark picture with brightness maxed. I believe the
> problem to be 12k 2w resistors on yolk board being out of
> tolerance. Customer has low budget. Can't find much out there on this
> model. any extra tips would be greatly appreciated.
>
> Thanks,
>
> Doyle
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
