Had a problem like that and the delay was bad. check to see if you have video going into it. It can be resoldered. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Paul" <dntwntv@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, December 21, 2005 9:19 PM Subject: [TechAssist] Zenith digital SG3541T > I have one last problem with this beast. It has no video except in PIP > mode. > All OSD is normal. Sound is normal. It originally had a vertical problem. > Then > it would not turn on. I fixed those now the video problem. This thing is > disintegrating before my eyes. No video through the video input jacks > either. I > don't have any tips for this problem on this set. Maybe someone else does > and > could post them. I don't think the problem is in the 700 board. The > video was > there > before the vertical was fixed. The SMPS or the sweep board are the most > likely > suspects. The PIP looks normal except stretched a bit till I can adjust. > > Paul > > Paul ,B > Central TV&Video > 911W Grand Ave > Grover Beach Ca. > (805)481-8084 > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search > engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/