What is your b+ voltage from the power supply? Is it low? Most of those chassis had problems in the regulator area bad caps or the regulator itself. Also it coul;d be a leaky diode in the secondary power supply but without more info I am just guessing. Shaun ----- Original Message ----- From: "Dave and Kim" <davidandkimberly1@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, February 16, 2002 8:19 PM Subject: [TechAssist] Re: Zenith chassis > > Changed the vertical output IC may no difference > ----- Original Message ----- > From: "Shaun" <ssroark@xxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Thursday, February 14, 2002 9:52 PM > Subject: [TechAssist] Re: Zenith chassis > > > > > > Umm Bad vertical ic. > > Shaun > > ----- Original Message ----- > > From: "Dave and Kim" <davidandkimberly1@xxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Thursday, February 14, 2002 4:22 PM > > Subject: [TechAssist] Zenith chassis > > > > > > > I have a Zenith tv I don't have the model number but the main module is > a > > 9-1130-3. It has a problem that looks like the flyback breaking down. If > you > > turn up g2 the problem gets worse. It has white line through the picture. > I > > tried another flyback and have the chassis on a jig. Has anyone seen this > > problem before and know what the fix is. > > > > > > Thanks > > > Dave > > > > > > ------------------------------------------ > > > Make your TechAssist database better! > > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > > ------------------------------------------ > > > To UNSUBSCRIBE your email address, click here: > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > Or send a BLANK email with unsubscribe in the > > > SUBJECT field to the address above. > > > > > > > ------------------------------------------ > > Make your TechAssist database better! > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.