bill, for the green or blue haze, r5102 on each of crt boards, for no video, try r3243(110K) and r3244(82k), also, when I have found these open, I have found that convergance board has damage(stks, resistors and caps around stks) hth charles betzler Best Electronics repair1@xxxxxxxxxxxxx ----- Original Message ----- From: "Bill S" <billans@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, January 10, 2002 12:11 PM Subject: [TechAssist] Zenith Z56ZB3R8 > > Hi all > This unit came in with ??strange?? descriptions. Apparently according to > the customer, Either the set went green haze ( Husband said this ) the wife > said blue haze and then after a week of this, the video went out altogether. > There is still sound. No osd or anything like that appears. > > I do not have the print for this, but did check to see if there is any high > voltages and there is not.... I also checked to see if the HOT parts are bad > solder or and shorted and nothing apparent shows > > Any ideas or commonality with these units?? > > Thanks > > Bill > > > ------------------------------------------ > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.