Hi Found the open 120 K resistor on the crt module. What causes these 120 K resistors to go bad???? Is it the white glue that Ron mentioned in this post? Bill Sorensen New Life Video & Audio billans@xxxxxxxxxxxx - - - - - - - - - - - - - - - - - - - ----- Original Message ----- From: "Ron Miller" <rlmbkm@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, May 19, 2002 3:17 PM Subject: [TechAssist] Re: Zenith Z56Z83D7 Bowed lines fixed, but now smeared picture > > Check 120k resisters on each crt pcb,the ones that connect from 15K 3 watt > to base bias resisters.Remove one end from pcb,also 110 Kohm off horiz > output,has white glue near/on it.HTH > Country TV > Ron Miller > 484 FM444 S. > Inez,TX 77968-5002 > V.(361)782-6419. F.(361)782-9149 > > ----- Original Message ----- > From: "Bill S" <billans@xxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Sunday, May 19, 2002 7:20 PM > Subject: [TechAssist] Zenith Z56Z83D7 Bowed lines fixed, but now smeared > picture > > > > > > Ugh! > > I had worked on this a month ago with the two resistors being opened or > > changed in value. R3243 was open. R3244 checked Ok. The customer called > > and told me that the set was working good except that the picture was > going > > goofy. He brought it in here and I would say that there is a smearey or > > smudgy picture. The faces look green. Tint control does nothing. I have > > gone over all the connections to see if something came loose and so far > > nothing. Could the focus/splitter module have gone bad just > "coincidently"? > > Or are there other things going on? > > Thankyou for your help > > > > Bill Sorensen > > New Life Video & Audio > > billans@xxxxxxxxxxxx > > - - - - - - - - - - - - - - - - - - - > > > > > > > > > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > To CHANGE your email address, click here: > > http://www.tech-assist.org/change.html > > ------------------------------------------ > > ***NEW*** Tips Added Instantly!!!*** > > Submit Repair Tips here: > > http://www.tech-assist.org/secure/tip/ > > > > > > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/