These came from B&D. I too will not use the TT's. Got 5 STR53041's and all were bad. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: <gulftech@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, January 23, 2005 4:03 PM Subject: [TechAssist] Re: Zenith Z52Z95D8 9-1674 SWEEP 9-1690 CONVERGENCE. update > That is affirmative. The STK392-180 is a proper upgrade for the -110. I > think the key may be where the chip comes from. I have certainly had > trouble with convergence chips before. Will never again buy the > TT-series IC's. > > > Ken Smith > Gulf Technical Services > 3034 Gulf Breeze Parkway > Gulf Breeze, FL 32563 > 850-934-8324 (Voice), 850-932-0819 (fax) > > On Sun, 23 Jan 2005 13:52:02 -0500 "al m" <ampm@xxxxxxx> writes: >> Thanks Pete. I saw on here to replace them with 180's???? >> Al Marquardt >> ampm@xxxxxxx >> Al Marquardt Electronic Repair >> 206 W Main >> Girardville Pa. 17935 >> ----- Original Message ----- >> From: "pete" <tvtech@xxxxxxxxxxxxx> >> To: <techassist@xxxxxxxxxxxxx> >> Sent: Sunday, January 23, 2005 1:47 PM >> Subject: [TechAssist] Re: Zenith Z52Z95D8 9-1674 SWEEP 9-1690 >> CONVERGENCE. >> update >> >> >> > al think you should replace buth ics with a 110 number and see >> what >> > happens >> > Ive never used 180s to replace 110s >> > >> > good luck >> > >> > Pete >> > Perdomo Tv Inc Since 1972 >> > Miami.Fl >> > ----- Original Message ----- >> > From: "al m" <ampm@xxxxxxx> >> > To: <techassist@xxxxxxxxxxxxx> >> > Sent: Sunday, January 23, 2005 10:04 AM >> > Subject: [TechAssist] Re: Zenith Z52Z95D8 9-1674 SWEEP 9-1690 >> CONVERGENCE. >> > update >> > >> > >> >> If someone gets a 9-1690 convergence board in, could you please >> let me >> >> know >> >> if the blue convergence heatsink should be running hotter than >> the red >> >> one. >> >> Mine is running at 138f deg.. >> >> Al Marquardt >> >> ampm@xxxxxxx >> >> Al Marquardt Electronic Repair >> >> 206 W Main >> >> Girardville Pa. 17935 >> >> ----- Original Message ----- >> >> From: "al m" <ampm@xxxxxxx> >> >> To: <techassist@xxxxxxxxxxxxx> >> >> Sent: Wednesday, January 19, 2005 4:18 PM >> >> Subject: [TechAssist] Re: Zenith Z52Z95D8 9-1674 SWEEP 9-1690 >> >> CONVERGENCE. >> >> update >> >> >> >> >> >>> >> >>> This set the blue convergence was replaced with a STK392-180. >> The >> >>> picture >> >>> is >> >>> good but the heat sink that the IC is on is measuring 139Fdeg. >> The red >> >>> heat >> >>> sink is a lot cooler. I have changed all caps on the board and >> checked >> >>> all >> >>> the other components. There is a -5V regulator on this heat >> sink. The >> >>> voltages are all correct on the board. Could this heatsink be >> running >> >>> hotter >> >>> than the other one because of the -5V regulator? Could this be >> normal? >> >>> All >> >>> the heat seems to come from the -5V regulator. When I measure the >> temp >> >>> on >> >>> the IC it is cool but on the regulator it is 138F. Am I chasing >> a ghost >> >>> again with this being normal? Thanks. >> >>> Al Marquardt >> >>> ampm@xxxxxxx >> >>> Al Marquardt Electronic Repair >> >>> 206 W Main >> >>> Girardville Pa. 17935 >> >>> ----- Original Message ----- >> >>> From: "al m" <ampm@xxxxxxx> >> >>> To: "tech assist" <techassist@xxxxxxxxxxxxx> >> >>> Sent: Saturday, January 08, 2005 11:44 AM >> >>> Subject: [TechAssist] Zenith Z52Z95D8 9-1674 SWEEP 9-1690 >> CONVERGENCE. >> >>> >> >>> >> >>>> This set had no power. I replaced the B+ diode and the set ran >> but the >> >>>> blue >> >>>> convergence was off. Changed the blue convergence IC ( >> STK392-110 with >> >>>> STK392-180). The Ic's are running hot. How hot are these >> supposed to >> >>>> run. >> >>>> I >> >>>> can keep my finger on it but it is hot. I may have something >> more wrong >> >>>> with >> >>>> the power supply. >> >>>> Al Marquardt >> >>>> ampm@xxxxxxx >> >>>> Al Marquardt Electronic Repair >> >>>> 206 W Main >> >>>> Girardville Pa. 17935 >> >>>> >> >>>> >> >>>> >> >>>> >> > ------------------------------------------------------------------------- > ---- >> >>>> Lost Password: >> >>>> http://www.tech-assist.org and select "Login Problems?". >> >>>> Email Archives: >> >>>> //www.freelists.org/archives/techassist/ >> >>>> >> >>>> >> >>> >> >>> >> >>> >> >>> >> > ------------------------------------------------------------------------- > ---- >> >>> Lost Password: >> >>> http://www.tech-assist.org and select "Login Problems?". >> >>> Email Archives: >> >>> //www.freelists.org/archives/techassist/ >> >>> >> >>> >> >> >> >> >> >> >> >> >> > ------------------------------------------------------------------------- > ---- >> >> Lost Password: >> >> http://www.tech-assist.org and select "Login Problems?". >> >> Email Archives: >> >> //www.freelists.org/archives/techassist/ >> >> >> >> >> >> -- >> >> No virus found in this incoming message. >> >> Checked by AVG Anti-Virus. >> >> Version: 7.0.300 / Virus Database: 265.7.2 - Release Date: >> 1/21/2005 >> >> >> >> >> > >> > >> > >> > -- >> > No virus found in this outgoing message. >> > Checked by AVG Anti-Virus. >> > Version: 7.0.300 / Virus Database: 265.7.2 - Release Date: >> 1/21/2005 >> > >> > >> > >> > ------------------------------------------------------------------------- > ---- >> > Lost Password: >> > http://www.tech-assist.org and select "Login Problems?". >> > Email Archives: >> > //www.freelists.org/archives/techassist/ >> > >> > >> >> >> >> > ------------------------------------------------------------------------- > ---- >> Lost Password: >> http://www.tech-assist.org and select "Login Problems?". >> Email Archives: >> //www.freelists.org/archives/techassist/ >> >> > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/