[TechAssist] Re: Zenith Z36x31D
- From: "Bob@bobsTV" <woodman17@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Mon, 14 Nov 2005 15:02:10 -0500
Replace the two caps in the power supply 100 and 22mf
Bob.
Bob's TV Worcester, ma
woodman17@xxxxxxxxxxx
----- Original Message -----
From: "Hoyt's TV" <hoytstv@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, November 14, 2005 2:53 PM
Subject: [TechAssist] Zenith Z36x31D
> I have a call for this one that has to be turned on several times before
it
> stays on.
> It has a 9-1813 according to my old Z-Tips program.
>
> The only tips that show up are for dead set and include bad ICs.
>
> This one will eventually run so I'm suspecting a cap somewhere in the
power
> circuits. Rather than buy a module to take out there, I would like to just
> replace the cap if someone has any information on which one.
>
>
> Russ Hoyt
> Hoyt's TV
> Exeter, NH
>
>
>
> --------------------------------------------------------------------------
---
> This Email List is accessible to the general public through search
engines. Remove: http://www.tech-assist.org/remove.htm
> Set Vacation
mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> Lost Password: http://www.tech-assist.org and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
This Email List is accessible to the general public through search engines.
Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
