[TechAssist] Re: Zenith Tuner problem fixed
- From: "Bob@Bobs tv" <woodman1@xxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 8 Oct 2004 15:01:20 -0400
Darrell,
Glad you found the problem.............BUT you should reply with
your original post......People will read your last post and have no clue
what your talking about......
Bob,
Bobs TV Worcester, ma
woodman1@xxxxxxxx
Main 508-853-1482
Fax 508-853-1480
----- Original Message -----
From: "Darrell Goodrich" <darrellgoodrich@xxxxxxxxxxxxx>
To: "TECHASSIST" <techassist@xxxxxxxxxxxxx>
Sent: Friday, October 08, 2004 2:51 PM
Subject: [TechAssist] Zenith Tuner problem fixed
> Thanks to both Bob's that responded
> After I sent my message to Techassist I found a hairline break in a trace
going to a tuner point.
> jumpered the crack. removed the alligator clip I was using for a antenna
attached a outside antenna then Auto programmed. now can channel up and
down with control panel
> thanks again.
> Darrell
> GoodrichElectronics
> darrellgoodrich@xxxxxxxxxxxxx
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
