That funny, That the info I got when I first had that problem and I found the bad cap. It got me out of the horz circuit and on another tract to the repair. If you don't have anything good to say shut-up. Phillip R Hull phil245@xxxxxxxxxxxxx ----- Original Message ----- From: <electronicrepair@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, September 19, 2001 1:19 PM Subject: [TechAssist] Re: Zenith TV with noise lines horizontal model SJ2722LK5 > > PHILL, THE INFO YOU GIVE SERVES NOTHING BUT A WASTE OF TIME WITHOUT THE > LOCATION NUMBER. THANKS, > GUY R. WILLIAMS > DeVEAUX ELECTRONICS > 1324 1/2 PRIMROSE;TOLEDO, OHIO 43612 > Ph# 419-478-6500 FAX# 419-478-1742 > ELECTRONICREPAIR@xxxxxxxx > On Wed, 19 Sep 2001 09:40:41 -0400 "Phillip R. Hull" > <phil245@xxxxxxxxxxxxx> writes: > > > > Look for a bad electrolitic cap next to the Jungle IC > > Phillip R Hull > > phil245@xxxxxxxxxxxxx > > ----- Original Message ----- > > From: "Trac Dang" <t8872695@xxxxxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Tuesday, September 18, 2001 10:15 PM > > Subject: [TechAssist] Zenith TV with noise lines horizontal model > > SJ2722LK5 > > > > > > > > > > Hello friends tech. > > > I am working with Zenith tv . The picture has lines noise > > horizontal. This > > > goes with rattle > > > noise in the tv .I cannot locate the noise where it comes from. > > when the > > > noise is off > > > the picture is ok.I already changed the flyback but it does not > > help. > > > Any ideas is appriciated. > > > Dang TVCR. > > ________________________________________________________________ > GET INTERNET ACCESS FROM JUNO! > Juno offers FREE or PREMIUM Internet access for less! > Join Juno today! For your FREE software, visit: > http://dl.www.juno.com/get/tagj. > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.