Bob, The picture and sound is perfect on cannel 2. Thanks, Mark At 04:50 PM 1/29/03, you wrote: >Mark, > Does the set have sound and pix on chan 2? If you do it, could > be a problem with the Gemstar section.. Getting ready to close.. I will > check notes on this set and get back to you.. > >Bob, > >Bobs TV Worcester, ma > >woodman1@xxxxxxxx > >Main 508-853-1482 >Fax 508-853-1480 > > > >At 10:23 AM 1/29/03 -0500, electronicrepair@xxxxxxxxxxx wrote: > > >This set will stay on chan. 2, if you change chan. it shows on OSD the > > >chan. number changing but it always stays on chan. 2. > > >I auto programmed the set, it shows that the active chan. were found, but > > >it still stays on chan. 2. > > >I cant check the 33v line because i don't have a print. I remember reading > > >somewhere that there was a .01mf from one of the tuner pins to ground > > >shorted and causing > > >a problem like that. > > >any help will be a big help. > > > > > >Thanks, Mark > > > >------------------------------------------ >Submit A Repair Tip For Everyone Here: >http://www.tech-assist.org/secure/tip/main.html >------------------------------------------ >To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html >To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html Thank you, Electronic Repair Services 48 W. James St. Lancaster, PA 17603 ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html