[TechAssist] Re: Zenith SY2772DT 9-1629
- From: "Bob@Bobs tv" <woodman1@xxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 25 Jun 2004 13:42:35 -0400
Peggs,
The easy way to exit the second factory menu.. make your settings,
then in the customer menu set the clock to any time, that way if you forgot
to go back to page one, clock setting does it for you..
Bob,
Bobs TV Worcester, ma
woodman1@xxxxxxxx
Main 508-853-1482
Fax 508-853-1480
----- Original Message -----
From: "peggs" <peggs@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>; <techassist@xxxxxxxxxxxxx>
Sent: Friday, June 25, 2004 3:33 PM
Subject: [TechAssist] Re: Zenith SY2772DT 9-1629
> I'm thinking the first time I was in the S. Menu,I exited(enter button)
> from the
> 2nd page,which is a no no.I didn't know this would send it to the AC On
State.
> But I found out that I exited wrong because My 'customer' color
adjustments
> would default to
> B&W(must have been when I was adjusting Gray Scale).I had to go back
in,and
> exit properly to get
> my 'customer' video adjustments to default back to normal.When I say
> default,everytime I went
> from 'customer' to Preset,back to 'customer', the picture would be in B&W.
>
> You know,playing around in a Service Menu,if you're not completely
familiar
> with it,is probably not
> a good idea :-((
>
> Peggs
>
> At 10:11 AM 6/25/04, John at Main TV wrote:
> >If you changed the color setup you must have changed parameter 1 from 0
to 1
> >in order to access all the different setups. Before you exit you must
> >return this setting to 0 or the set will not turn off. John.
> >John Mielke
> >Main TV
> >636 main St.
> >Longmont, Co
> >phone 303 776 6955
> >fax 303 776 0792
> >maintv2004@xxxxxxxxxxx
> >
> >----- Original Message -----
> >From: "peggs" <peggs@xxxxxxxxxxxxx>
> >To: <techassist@xxxxxxxxxxxxx>
> >Sent: Friday, June 25, 2004 1:05 PM
> >Subject: [TechAssist] Zenith SY2772DT 9-1629
> >
> >
> > > Won't turn off,and comes on when plugged in.
> > > Power Button,nor Remote will turn the set off.
> > > I'm not sure if it had this symptom initially or not.
> > > This set had a weak picture,I rejuvinated and now it has a great
picture.
> > > Obviously,I had to go into the Service Menu to adjust the Gray
Scale,and
> > > I'm wondering if
> > > I gave it this Won't Turn off,comes on at plug-in symptom.
> > > I'm not an expert at these Zenith Service Menus,so I was hoping one of
you
> > > could guide me
> > > a little on these Paramters.
> > >
> > > I'm asking because,I know Zenith has a few Strange
Adjustments/Parameters
> > > in their
> > > Service Menu.The one that comes to mind is For the Remote Control.
> > > A setting that will keep the Remote from working.
> > > Zen 2,I think it's called(which will not change for
me,BTW)...............
> > >
> > > ..........well I just answered my own question(by accident) but I
thought
> >I
> > > would post this anyway
> > > for those, like me,that didn't know.
> > > After getting in the Service Menu(Menu,9,8,7,6,Enter) on the first
page is
> >an
> > > AC On(1 is On,0 is Off,I had changed it to 1).......I had mistakenly
> > > thought this was Auto-Color.
> > > Well it's not, it keeps the TV in the On state.
> > >
> > > Peggs
> > > Peggs' Electronics
> > > 1519 West 2nd Street
> > > Owensboro,KY 42301
> > > 270-926-4968
> > > fax 270-686-7399
> > > peggs@xxxxxxxxxxxxx
> > >
> > >
> >
> --------------------------------------------------------------------------
> >---
> > > Lost Password:
> > > http://www.tech-assist.org and select "Login Problems?".
> > > Email Archives:
> > > //www.freelists.org/archives/techassist/
> > >
> >
>
>---------------------------------------------------------------------------
--
> >Lost Password:
> >http://www.tech-assist.org and select "Login Problems?".
> >Email Archives:
> >//www.freelists.org/archives/techassist/
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
