[TechAssist] Re: Zenith SS6515G, Intermittent Sound, FIXED
- From: "Jeff Dougherty" <jeff@xxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 31 Oct 2001 16:39:30 -0500
Ken,
We only really need the main module number.
A lot of the info I have is listed under module or chassis number.
I hope this is the same fix for my mid 90's Zenith that has intermittent
static in the audio..on high pitched , or louder scenes...kind of hard to
describe.
Jeff
mailto:Jeff@xxxxxxxxxxxxxxxxxx www.9-11-2001tragedy.com
Help those affected by the NY/PA tragedy:
The Red Cross needs is mobilizing a national blood drive and needs your
help. Please call 800-GIVE LIFE, to find out where in your area you can
donate blood.
FAX 1-413-280-0677
Intrepid Video & Electronics
Harrisburg, PA 17111
717-909-8844
www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com
----- Original Message -----
From: <gulftech@xxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, October 31, 2001 10:31 AM
Subject: [TechAssist] Re: Zenith SS6515G, Intermittent Sound, FIXED
>
> Thanks to Jeff Dougherty, Clint Hamilton, and Ralph Dorsey,
>
> The set is fixed, or will be in a few minutes when my iron gets hot. I
> applied pressure to the control panel and sound returned. This is one I
> will not forget and my help y'all!
>
> I apologize for not listing the module numbers in my original post. I
> know better than that. I had them written down on my desk to include in
> the post, but was tired and just forgot to include them. I list them
> below:
> 9-407-02
> 9-155-20
> 9-169-03
> 9-186-08
> 9-253-04
> 9-324-03
>
> Thanks again,
>
>
> Ken Smith
> Gulf Technical Services
> 3034 Gulf Breeze Parkway
> Gulf Breeze, FL 32561
> 850-934-8324 (Voice) 850-932-0819 (Fax)
>
> -----------------------
>
> On Tue, 30 Oct 2001 23:10:08 -0500 "Jeff Dougherty"
> <jeff@xxxxxxxxxxxxxxxxxx> writes:
> >
> > Ken,
> > Sorry about the CAPS>...I just copied and pasted.
> > From Tech-Repair CD:
> > APPLY PRESSURE ON THE CONTROL PANEL. POOR SOLDER CONNECTIONS
> > ON THE GRIPLETS OR EYELETS BETWEEN 6B4 & 7A4 PLUGS ON THE
> > CONTROL PANEL
> > If this isn't the problem, send the module number..I may have
> > something
> > under that.
> > You should always post the module/chassis and model number.
> > Jeff
> >
> > mailto:Jeff@xxxxxxxxxxxxxxxxxx www.9-11-2001tragedy.com
> > Help those affected by the NY/PA tragedy:
> > The Red Cross needs is mobilizing a national blood drive and needs
> > your
> > help. Please call 800-GIVE LIFE, to find out where in your area you
> > can
> > donate blood.
> > FAX 1-413-280-0677
> > Intrepid Video & Electronics
> > Harrisburg, PA 17111
> > 717-909-8844
> > www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com
> > ----- Original Message -----
> > From: <gulftech@xxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Tuesday, October 30, 2001 9:58 PM
> > Subject: [TechAssist] Zenith SS6515G, Intermittent Sound
> >
> >
> > >
> > > Friends,
> > >
> > > This set has intermittent sound. It's driving me crazy. Once it
> > comes
> > > on, will be fine until turned off for awhile. May come back fine,
> > may be
> > > no audio for several minutes, may no audio for hours.
> > >
> > > This is all I know. The audio pcb is fine. When I have no audio,
> > there
> > > is no audio going into the module. With no print, I don't know
> > where it
> > > is lost. Thought it was the rear-panel switch that selects AUX
> > > STEREO/TV, but that idea did not pan out. Am pulling my hair out
> > on this
> > > one, but I have little left!
> > >
> > > I know I am giving little information, but it's all I have. Unit
> > came in
> > > dead. I repaired the p/s and all seemed fine. The customer came
> > to pick
> > > it up and asked to see it working. It came on with no sound. He
> > said,
> > > "Oh, yes, before it died it had no sound." (Nice to tell me then!)
> > > While we were talking, the sound came on. This has haunted me for
> > three
> > > weeks.
> > >
> > > A schematic or even a block diagram would be most helpful.
> > >
> > > All suggestions welcome.
> > >
> > > Thanks,
> > >
> > >
> > > Ken Smith
> > > Gulf Technical Services
> > > 3034 Gulf Breeze Parkway
> > > Gulf Breeze, FL 32561
> > > 850-934-8324 (Voice) 850-932-0819 (Fax)
> > >
> > > ________________________________________________________________
> > > GET INTERNET ACCESS FROM JUNO!
> > > Juno offers FREE or PREMIUM Internet access for less!
> > > Join Juno today! For your FREE software, visit:
> > > http://dl.www.juno.com/get/web/.
> > > Help make your TechAssist online repair tips
> > > database better! Submit your fixes here:
> > > http://www.circuitwork.com/techassist/tip/#tips
> > > To unsubscribe write to:
> > > techassist-request@xxxxxxxxxxxxx
> > > with unsubscribe in the subject line.
> > >
> > >
> >
> > Help make your TechAssist online repair tips
> > database better! Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with unsubscribe in the subject line.
>
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today! For your FREE software, visit:
> http://dl.www.juno.com/get/web/.
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
>
>
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
