Hi; Do you have a print for this? I do not recognise the model number and am not able to see what print to use for the module since I have only micro fiches. If you have the print, go to the ABL cirucuit which is often times a feedback circuit from the flyback. You may be having problems with a small electrolytic cap in this circuit off the pin of the micro. Another thing to consider if this has a picture-in-picture set up is the PIP circuit is not filtering good. If this set has audio / video jacks, then send a video signal into the video and determine what happens when your increasing the screen control and brightness/contrast controls. Let us know what the results are. Thanks Bill Sorensen New Life Video & Audio billans@xxxxxxxxxxxx ----- Original Message ----- From: "Ken Dinckan" <kdinckan@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, February 20, 2002 6:12 AM Subject: [TechAssist] Re: Zenith--- SL79355 --- 9-1343 cant comtrol the B+ pic jumps with lite pictures > > did you check the caps around the vertical circuit? > e-mail to : kdinckan@xxxxxxx > Ken Dinckan > 2747 Roosevelt Street # B > Carlsbad CA 92008 > tel:(760)4341131 > fax:(760)4348856 > ----- Original Message ----- > From: <Fishervcr7@xxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, February 20, 2002 12:37 PM > Subject: [TechAssist] Zenith--- SL79355 --- 9-1343 cant comtrol the B+ pic > jumps with lite pictures > > > > > > Make: Zenith > > Model: SL79355 > > Chassis: 9-1343 > > > > I been working on this TV set for a long time and can't figure it this > out. > > When the picture is a dark screen the picture doesn't jump, but when you > get > > a light screen it jumps a lot and you cant stand it. I replaced the > picture > > tube, voltage regular, flyback and lot of other parts, and I cant find out > > what is causing this, can anyone help? > > > > Thanks! > > > > Donovan Shuppas > > Tri State TV Service Center's > > 824 Broadway Blvd. > > Steubenville,Ohio 43952 > > fishervcr7@xxxxxxx > > ------------------------------------------ > > Make your TechAssist database better! > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.