I turned the vertical all the way up and still not enough. Where is the best place to check on the 26 volt supply as I have no schematic. Shaun Advanced Electronics 224 West Riverview Ave. Fort Morgan, CO 80701 ----- Original Message ----- From: "Phil Bader" <tjanphyl@xxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, June 08, 2004 1:05 PM Subject: [TechAssist] Re: Zenith SE3191H Vertical problem. > Shaun, don't over analyze. > If bumping up the value fills the screen, go for it. > That's probably just an average value. > phil Bader > > Shaun wrote: > > >This set has the 9-700 digital module, 9-605-03 and 9-604-02. Problem is the > >vertical looks like it needs to be adjusted to make a full picture, but the > >adjustment is at 221 in the service menu which should be close for a full > >picture. I have checked or replace all the caps on the 9-605-03 along with > >several others on the 9-604-02. Anyone have any old notes on this beast? > > > >Shaun > > > >Advanced Electronics > >224 West Riverview Ave. > >Fort Morgan, CO 80701 > > > > > >--------------------------------------------------------------------------- -- > >Lost Password: > >http://www.tech-assist.org and select "Login Problems?". > >Email Archives: > >//www.freelists.org/archives/techassist/ > > > > > > > > -- > > Philip Bader > Jan Phyl TV Inc. (estab. 1976) > 3420 Recker Hwy. Winter Haven, Fl. 33880 > Fax (863) 299-8821 > email: tjanphyl@xxxxxxxxxxxxxxx > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/