Have you checked for a shorted relay? Kevin Wilks Kevin's TV and Video Repair Penticton BC Canada kevinstv@xxxxxxx ----- Original Message ----- From: "Ron Miller" <rlmbkm@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, October 03, 2002 1:45 PM Subject: [TechAssist] Zenith SC2793P,HV stays ON,Early digital manf:1986 > > SMPS: 9-370-06 > Sweep: 9-367-07 > Main: 9-535 > Cust wants fixed,came in dead growling noise,replaced caps on SMPS that > read high esr.Set comes on now pix and sound good (bose audio). > When one tries to turn off sound raster video all goes off but set still is > producing HV,filaments are on.Have replaced the 121-1040 and 121-1145 > transistors on SMPS pcb have no print or flowchart can't figure out what > should turn off the 26vdc feeding horiz drive circuit.Am using J2 digital > training manual TP 46 as a guide SMPS is similar to a 9-628.Anyone remember > this dog?Tia > > Country TV > Ron Miller > 484 FM444 S. > Inez,TX 77968-5002 > V.(361)782-6419. F.(361)782-9149 > e-mail: rlmbkm@xxxxxxxx > > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/