I don't know the location number, but it's a 120k. Jerry Christians Electronic Service ----- Original Message ----- From: "Shaun" <ssroark@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, January 07, 2002 7:24 PM Subject: [TechAssist] Re: Zenith RZ56Z83D7 (no video or OSD) | | Great thanks that fixed the pix problem but now I have a problem with the | green. When I bring up the cross hatch the the line from top to bottom is | purple not white but the line from side to side is white I remember this | being a bad resistor on the crt soclet board do you know which one? | | Shaun | ----- Original Message ----- | From: Jerry <geiting@xxxxxxxxxx> | To: <techassist@xxxxxxxxxxxxx> | Sent: Monday, January 07, 2002 4:35 PM | Subject: [TechAssist] Re: Zenith RZ56Z83D7 (no video or OSD) | | | > | > Shaun, | > The resistors Charles mentioned are in series right off the collector | of | > the horizontal output transistor. They are hard to spot because there is | a | > power resistor mounted above the 1st one off the horz output and there is | a | > lot of clutter in that area. I've found that the 110k is the one that | > usually opens. | > | > Jerry | > Christians Electronic Service | > | > ----- Original Message ----- | > From: "Shaun" <ssroark@xxxxxxxx> | > To: <techassist@xxxxxxxxxxxxx> | > Sent: Monday, January 07, 2002 6:03 PM | > Subject: [TechAssist] Re: Zenith RZ56Z83D7 (no video or OSD) | > | > | > | | > | Where are they exactly I still dont see them? | > | ----- Original Message ----- | > | From: repair1 <repair1@xxxxxxxxxxxxx> | > | To: <techassist@xxxxxxxxxxxxx> | > | Sent: Monday, January 07, 2002 2:43 PM | > | Subject: [TechAssist] Re: Zenith RZ56Z83D7 (no video or OSD) | > | | > | | > | > | > | > shaun, replacer3243, and r3244, (by hot heatsink, | > | > 110k and 82k respectively hth | > | > charles betzler | > | > Best Electronics | > | > repair1@xxxxxxxxxxxxx | > | > | > | > | > | > | > | > ----- Original Message ----- | > | > From: "Shaun" <ssroark@xxxxxxxx> | > | > To: <techassist@xxxxxxxxxxxxx> | > | > Sent: Monday, January 07, 2002 1:03 PM | > | > Subject: [TechAssist] Zenith RZ56Z83D7 (no video or OSD) | > | > | > | > | > | > > Hi, I have this Zenith projo that has no video or on screen display. | I | > | can | > | > turn up the G2 and there is bright screen with retrace lines and the | > | picture | > | > looks like the convergance is not working (bowed on top and bottom) | any | > | > ideas? | > | > > | > | > > Shaun | > | > > | > | > > ------------------------------------------ | > | > > Help make your TechAssist database better! | > | > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips | > | > > ------------------------------------------ | > | > > To UNSUBSCRIBE your email address, click here: | > | > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe | > | > > Or send a BLANK email with unsubscribe in the | > | > > SUBJECT field to the address above. | > | > > | > | > | > | > ------------------------------------------ | > | > Help make your TechAssist database better! | > | > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips | > | > ------------------------------------------ | > | > To UNSUBSCRIBE your email address, click here: | > | > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe | > | > Or send a BLANK email with unsubscribe in the | > | > SUBJECT field to the address above. | > | > | > | | > | ------------------------------------------ | > | Help make your TechAssist database better! | > | Submit your fixes here: http://circuitwork.com/techassist/tip/#tips | > | ------------------------------------------ | > | To UNSUBSCRIBE your email address, click here: | > | mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe | > | Or send a BLANK email with unsubscribe in the | > | SUBJECT field to the address above. | > | | > | > | > ------------------------------------------ | > Help make your TechAssist database better! | > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips | > ------------------------------------------ | > To UNSUBSCRIBE your email address, click here: | > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe | > Or send a BLANK email with unsubscribe in the | > SUBJECT field to the address above. | > | | ------------------------------------------ | Help make your TechAssist database better! | Submit your fixes here: http://circuitwork.com/techassist/tip/#tips | ------------------------------------------ | To UNSUBSCRIBE your email address, click here: | mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe | Or send a BLANK email with unsubscribe in the | SUBJECT field to the address above. | | ------------------------------------------ Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.