I had this problem on PV4665 was CRT fluid leak on main board cleaned board and replaced crt assembly fixed Robert tvservice@xxxxxxxxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: "Jon Garver" <jongar@xxxxxxxxxxxxx> To: "TechAssist" <techassist@xxxxxxxxxxxxx> Sent: Thursday, October 17, 2002 5:04 PM Subject: [TechAssist] Zenith Projo Z52Z95D8 Picture has Flashing Spells, OSD doesn't display while flashing. > > This Zenith projection Z52Z95D8 is a call back. Original problem > was dead. Replaced fly, H.O.T., B+ diode. Took it home last week. > > According to the customer, it is now flickering or flashing. At times just > occasionally, now it is doing it more often, sometimes so bad that you > can't see the picture. When it is acting up, they can't access the OSD. > > Going to look at it next week so I thought maybe someone has seen this > before and can give me a clue as to what might be the problem. > > Thanks, > > Jon Garver > Heritage Television Service > Monticello, Indiana > 574-583-9681 > jongar@xxxxxxxxxxxxx or > HeritageTV@xxxxxxxxxxx > > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/