. If complete screen it could be control, y or x main or panel. You can rule out the smps as voltages are listed and measureable. I would try control first, but sometimes all you can do is swap (most to least likley) until you find the guilty board. Tom -- Carson City TV-VCR 2164 E Hwy 50 Carson City, NV 89701 775-887-9089 fax 775 887-1067 -------------- Original message from "Tim Poole" <tdp13158@xxxxxxxxxxxxx>: -------------- > Anyone do alot of plazma's? I have a picture I can send if anyone is > interested. > Set has just distorted lines on display and sound. I assume the display > control > board is bad but wanted to see if anyone has seen this to confirm? Thanks, > Tim > Tim Poole dba > A-Mobile TV Shop & Precision TV Svc. > Fredericktown Ohio, 43019 > > tdp13158@xxxxxxxxxxxxx > pooletim@xxxxxxxxxxx > > 419-756-3443 > FAX 740-694-1032 > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search engines. > Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/