If no controls behind speaker grille use "menu", 9999, "enter" with remote to access convergence menu Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: "Larry E." <videotech@xxxxxxxxxxxx> To: "tech-assist" <techassist@xxxxxxxxxxxxx> Sent: Wednesday, May 05, 2004 3:27 PM Subject: [TechAssist] Zenith PVY4665RK 9-1674 Now Convergence Problems > Hi Guys, I have this projection set in the shop that was dead so I > replaced the 9-1674 module, > set now starts but picture is poor, replaced R5102 on Green crt board, > picture improved some, > checked the resistor on red & blue they are on the money at 120K. One of > the convergence IC`s > is running hot (IC4009) so I replaced it, still runs hot, picture > appears to be out of focus a little on the right upper side of the > screen and my convergence is off a little on both red & blue, I don`t > have the print of course, tried the 98xx enter for factory service but > don`t see anything for convergence adjust, I need some help on this > one, I`ve got way too much time and money > in this one already and the customers getting impatient, tia, Larry E > > Larry Eastman > American TV & Electronics > Crystal River, Fl. > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/