Hi Guys, I have this projection set in the shop that was dead so I replaced the 9-1674 module, set now starts but picture is poor, replaced R5102 on Green crt board, picture improved some, checked the resistor on red & blue they are on the money at 120K. One of the convergence IC`s is running hot (IC4009) so I replaced it, still runs hot, picture appears to be out of focus a little on the right upper side of the screen and my convergence is off a little on both red & blue, I don`t have the print of course, tried the 98xx enter for factory service but don`t see anything for convergence adjust, I need some help on this one, I`ve got way too much time and money in this one already and the customers getting impatient, tia, Larry E Larry Eastman American TV & Electronics Crystal River, Fl. ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/