Ernie, Take the mirror to a glass place and have them install an acrylic mirror in the frame. Should be around $50.00 and look lots better. Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 ----- Original Message ----- From: "Ernie - Valley TV & Stereo" <valleytv@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, January 08, 2005 12:28 PM Subject: [TechAssist] Zenith PTV model A50M91W5 Hi gang: Had an interesting problem with this set. Set came in dead - replaced 9-1978-01R module and restored operation. but had a convergence problem on right side of raster. convergence on right, especially red horiz.lines are curved downward on lower part of screen and upward on top half, blue & green are affected as well. Replaced both convergence IC's (STK392-110) - NO HELP. No convergence adjustments would affect only the right horiz. lines. Checked components on convergence board, but found no problems. A few days later I checked the mirror and found the problem. This set uses a mylar mirror stretched over a, (I presume plastic) frame. The mylar film had an area about 6 inches in diameter that was deformed caused by the frame which was bulged and raised and distorted the mirror How this happened is a mystery to me - no excessive heat nearby. Now I have to convince the customer that he had this problem before and live with it or replace the mirror for another $200.00. Ernie Niessen Valley TV & Stereo 9401 Fletcher St. Chilliwack, B.C. V2P 4Z4 Canada Since 1960 valleytv@xxxxxxxxxxxx ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/