Their probably afraid to tell you to change the CRT....though. -Ed- ----- Original Message ----- From: "Robert Herring" <supertek66@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, October 02, 2001 9:39 AM Subject: [TechAssist] Re: Zenith PTV Z50Z53, Looks Like Bad CRT's > > Zenith tech line says cause is crt arcing > they suggest replacing all three crt video boards together with upgraded > replacements ( extra spark gaps, diodes, and video output improved) but I > agree usually resistor is the fix. > Robert > supertek66@xxxxxxxxxxx > robert_herring@xxxxxxxx > H&H Electronics Inc > Dallas,Tx. 75233 > ----- Original Message ----- > From: <gulftech@xxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Monday, October 01, 2001 12:12 PM > Subject: [TechAssist] Zenith PTV Z50Z53, Looks Like Bad CRT's > > > > > > Friends, > > > > This projection set is about four years old. When you turn it on, you > > would think all three CRT's are bad, like a gassy CRT. Have run into > > three of four of these (in various models). The symptom is caused by an > > open 120K resistor on EACH CRT board. (The board is 9-1303-6. The > > resistor is R5102.) > > > > The first one cost me the price of a new blue CRT before I found the open > > resistor. > > > > I write this to inform those of you who haven't seen this before and to > > ask a question of those who have. What causes the resistor to open up? > > Have never had one come back, but it makes me wonder. > > > > > > Ken Smith > > Gulf Technical Services > > 3034 Gulf Breeze Parkway > > Gulf Breeze, FL 32561 > > 850-934-8324 (Voice) 850-932-0819 (Fax) > > ________________________________________________________________ > > GET INTERNET ACCESS FROM JUNO! > > Juno offers FREE or PREMIUM Internet access for less! > > Join Juno today! For your FREE software, visit: > > http://dl.www.juno.com/get/web/. > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.