Thanks Kevin. I think I have a bad focus block or bad distribution block is there any way to check them to see which is bad. I can turn the blue screen control all the way down and tube goes out but the red and green stay lit . Also when turning the controls all the controls adjust the brightness on all the tubes. In other words when the green is turned the blue and red get brighter. Don't think that's right but never had to fool with these before. By the way turning the screens down stopped the flashing picture. al marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Kevin Harris" <kharris@xxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, June 06, 2003 8:50 PM Subject: [TechAssist] Re: Zenith PTV 9-1674-01 sweep module flashing picture > Al, they are original diodes. I buy original diodes and transitors from Zenith to make up my repair kits. Zenith sends transitors in egg crates and diodes on long strings. Probably because of the quantity I buy at a time they do not package them. If this helps here are common parts I use for this board. Let me know if I can help > > > 9-1674-SERIES REPAIR KIT > FX3403 4A FUSE > > C3460 100MFD @ 50V > > C3406 100MFD @ 25V > > C3478 100MFD @ 50V > > QX3201 121-1187 (MJE15030) > > QX3200 121-1167-01 (2SD2539) > > QX3402 121-1210-01 (2SK790) > > FLYBACK 95-4134-15/31-REP > > > CRX3412 103-417-06 > > CR3215 103-339-04 CAN USE FOR CR3217 > > > NOTES ****************** > > CHECK FOR BAD SOLDER CONNECTIONS ON LX3262 HORZ. LIN. COIL > > CHECK FOR BAD SOLDER CONNECTIONS ON TX3205 HORZ. XFORMER > > CHECK G2 FOCUS BLOCK A-17196-12-REP COMMON FAILURE ITEM > > (This kit represents the most common failure items, some other trouble shooting may be required) > > > Kevin Harris Sr. > kharris@xxxxxxxxxxxxxxxxx > http://www.tritronicsinc.com > 800-638-3328 ext 1241 > fax 1-800-888-3293 > > Tritronics, Inc. > 1306 Continental Dr > Abingdon, MD 21009 > > ** Philips Master Distributor > ** Hitachi Elite Distributor > ** RCA/GE/Proscan (TCE) Premier Distributor > ** Sharp Distributor of the Year 2000 - 2002 > ** Toshiba Distributor of the Year > ** NESDA Partner in Excellence > > > ----- Original Message ----- > From: al m > To: techassist@xxxxxxxxxxxxx > Sent: Friday, June 06, 2003 8:04 AM > Subject: [TechAssist] Re: Zenith PTV 9-1674-01 sweep module flashing picture > > > I used a 103-417-07 from tritronics, didn't come in a Zenith bag. > al marquardt > ampm@xxxxxxx > Al Marquardt Electronic Repair > 206 W Main > Girardville Pa. 17935 > ----- Original Message ----- > From: "Philip Bader" <tjanphyl@xxxxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Thursday, June 05, 2003 11:23 PM > Subject: [TechAssist] Re: Zenith PTV 9-1674-01 sweep module flashing picture > > > > Two other hi failure parts on these modules: > > R3243 (110K) front of HOT, and R3244 (82K) same area. > > Did you use a 103-417-06 OEM diode? > > P Bader > > > > al m wrote: > > > > > > This thing I changed the flyback, HOT, CRX3412. Fired it up and put my > sencore generator on it. With crosshatch and dots the picture is perfect but > with 10 bar staircase and the others it flashes and eventually shuts down.. > Seems to me it flashes on brighter pictures. All power supplies look OK even > with the picture flashing.Spraying cr3411 with freeze spray stops the > flashing. CR3411 is the 25V standby, can't make sense out of that one.It's > been a long day and I'm out of ideas, need some fresh thinking. Looks like > an ABL problem but I monitored it and nothing changes with the flashing.I'm > out of hair to pull. > > > al marquardt > > > ampm@xxxxxxx > > > Al Marquardt Electronic Repair > > > 206 W Main > > > Girardville Pa. 17935 > > > > **************************************************************************** > * > > > The Tech Address Book: > > > http://www.tech-assist.org/secure/tip/contact.html > > > Add a Repair Tip Here, or Change/Remove your Email Address: > > > http://www.tech-assist.org/secure/tip/main.html > > > Lost Password: > > > http://www.tech-assist.org and select "Lost your Login Info?". > > > Email Archives: > > > //www.freelists.org/archives/techassist/ > > > > -- > > Philip Bader > > Jan Phyl TV Inc. (estab. 1976) > > 3420 Recker Hwy. Winter Haven, Fl. 33880 > > Fax (863) 299-8821 > > email: tjanphyl@xxxxxxxxxxxxxxx > > > > > **************************************************************************** > * > > The Tech Address Book: > > http://www.tech-assist.org/secure/tip/contact.html > > Add a Repair Tip Here, or Change/Remove your Email Address: > > http://www.tech-assist.org/secure/tip/main.html > > Lost Password: > > http://www.tech-assist.org and select "Lost your Login Info?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > > > > **************************************************************************** * > The Tech Address Book: > http://www.tech-assist.org/secure/tip/contact.html > Add a Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.html > Lost Password: > http://www.tech-assist.org and select "Lost your Login Info?". > Email Archives: > //www.freelists.org/archives/techassist/ > **************************************************************************** * > The Tech Address Book: > http://www.tech-assist.org/secure/tip/contact.html > Add a Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.html > Lost Password: > http://www.tech-assist.org and select "Lost your Login Info?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ***************************************************************************** The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.html Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.html Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/