Thanks for info. That feed resistor feeds 18v to a 15 volt zener, zener shorted. Thanks Buck ----- Original Message ----- From: "Keith Trumbla" <ktrumbla@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, February 14, 2002 4:46 PM Subject: [TechAssist] Re: Zenith Model C25A24TF , Chassis#CA ,(9-2066 module) > > Hey Buck That would be a 75ohm 1/2 watt > > Keith Trumbla > O/O B.E.M Electronics Est.1954 > 839 Ellice ave. > Winnipeg Manitoba, Canada R3G 0C3 > Ph.(204)775-2875 Fax(204) 774-9192 > Mail to : ktrumbla@xxxxxxxxxxx > > >From: "sterling pasher" <spasher@xxxxxxxxxxxxxxxxx> > >Reply-To: techassist@xxxxxxxxxxxxx > >To: <techassist@xxxxxxxxxxxxx> > >Subject: [TechAssist] Zenith Model C25A24TF , Chassis#CA ,(9-2066 module) > >Date: Tue, 12 Feb 2002 06:04:00 -0330 > > > > > >Had one come in today. IC in SMPS bad. Replaced and PS seems OK. No sound > >or > >picture, but on screen display is OK. A resistor Rx3428 is burning up and I > >cannot tell the value. Could someone scan me a copy of schematic or at > >least > >tell me the value of the resistor. > > Thanks Buck > > Bucks TV > > Gander NF. Canada > > spasher@xxxxxxxxxxxxxxxxx > > > > > >------------------------------------------ > >Make your TechAssist database better! > >Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > >------------------------------------------ > >To UNSUBSCRIBE your email address, click here: > >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > >Or send a BLANK email with unsubscribe in the > >SUBJECT field to the address above. > > > > > > > > > _________________________________________________________________ > MSN Photos is the easiest way to share and print your photos: > http://photos.msn.com/support/worldwide.aspx > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.