Hello. Camera port (camport) refers to the front AV jacks. If you are sure there is no short on the video line, then check the zener diodes that are on those lines to ground on the main module for a short. Pin 10 of the micro should be 3.3v, if low (near ground), then you have a short. Try plugging a video source into the front and rear AV jacks to see if they are active. John. John Mielke Main TV 636 main St. Longmont, Co phone 303 776 6955 fax 303 776 0792 maintv2004@xxxxxxxxxxx ----- Original Message ----- From: <gulftech@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, April 01, 2004 8:35 AM Subject: [TechAssist] Zenith H2735DT3, 9-2086, Locked on A/V input > This set will autoprogram, but comes up with blank screen except for the > words "Camport" and "Stereo." When channel up, down, or direct access is > attempted, the screen displays "Disconect A/V Jacks." > > I can bring up the menu, but can't scroll down to items on each page. I > can get into the service menu, but anything I push brings up the > Disconect A/V Jack message. > > I had this happen almost two years ago, but don't remember what cured it. > I have checked the tact switches and the front and rear jack panels. > > TIA, > > > Ken Smith > Gulf Technical Services > 3034 Gulf Breeze Parkway > Gulf Breeze, FL 32563 > 850-934-8324 (Voice) 850-932-0819 (Fax) > > > ________________________________________________________________ > The best thing to hit the Internet in years - Juno SpeedBand! > Surf the Web up to FIVE TIMES FASTER! > Only $14.95/ month - visit www.juno.com to sign up today! > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/