Thanks I'll give it a try. Dave TV Man Inverness, Fl. ----- Original Message ----- From: "Larry E." <videotech@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, February 20, 2004 3:02 PM Subject: [TechAssist] Re: Zenith B/S PVR5263RK > Dave, check R3234 first, should be either 110k or 120k behind the HOT heatsink under the 3 watt resistor, have to lift one end to check, kills RGB to tubes, hth, Larry E > > Larry Eastman > American TV & Electronics > Crystal River, Fl. 34428 > > TV Man wrote: > > > Unit has sound no picture. The filaments don't light up. I have HV coming out of the flyback. How do you check the HV on each tube? They seem to be sealed. I'm guessing the focus block is bad, but before I order one I wanted to get some input. Thanks, Dave > > TV Man > > Inverness, Fl. > > > > -------------------------------------------------------------------------- --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/