If it's the Video Delay line, you will probably see smearing in your picture. Chroma dragging behind Video or Y signal. I presume any Video Delay line, from a scrap set...providing it's the same physical configuration should work. -Ed- Ed Gaidies Tel-Tek Electronics Ontario-Canada teltek3@xxxxxxxxxxxx ----- Original Message ----- From: "Paul" <dntwntv@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, January 23, 2006 4:35 PM Subject: [TechAssist] Zenith A32B43W delay line > Can someone tell me what this delay line DL2901 is used for? It was laying > over on the board, may have been that way from the factory, anyway I > straightened it up and it broke the wires from the potting material. It > doesn't appear to have affected the picture. I had fixed another problem > and was putting it back together and this happened. I don't know if it is > available or not yet. I have my doubts. > > Paul > > > Paul ,B > Central TV&Video > 911W Grand Ave > Grover Beach Ca. > (805)481-8084 > > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search > engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/