[TechAssist] Re: Zenith 9-186 resistor value needed...
- From: "LeRoy Westlund" <llw@xxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sun, 12 May 2002 12:03:58 -0600
Terry,
The only R3216 on the schematic is 1.2K + or - 1 % 1/2 watt.
HTH
LLW
LeRoy Westlund
Westlund TV & Electronics " I've enjoyed
93 North Main as much of this,
Centerfield, UT 84622-0087 as I can stand "
Ph./Fax 435-528-3822
mailto:LLW@xxxxxxxxxx
-----Original Message-----
From: Terry H. <tvdoc@xxxxxxxxxxxxxx>
To: Techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx>
Date: Sunday, May 12, 2002 11:37 AM
Subject: [TechAssist] Zenith 9-186 resistor value needed...
>
>This is R3216 which is actually on the multivibrator board mounted to the
>heatsink. Burned pretty good. It's been a long time, but I thought it was a
>2k but what I can make out on this, it looks like it would've been a 100k.
>Model no. missing on tag. Thanks.
>Terry H.
>
>
>------------------------------------------
>To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
>------------------------------------------
>***NEW*** Tips Added Instantly!!!***
>Submit Repair Tips here:
>http://www.tech-assist.org/secure/tip/
>
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
