[TechAssist] Re: Zenith 27" TV Model: SR2552S Chassis: 9-1558 Horizontal lines at top of screen
- From: "albert marquardt" <ampm@xxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 3 Nov 2001 06:41:43 -0800
you missundestood me i meant the poower from flyback probably 24v . the cap
on that line. and while you're there might as well change the rest of them.
al marquardt
ampm@xxxxxxx
----- Original Message -----
From: slvrfx <slvrfx@xxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, November 02, 2001 1:16 PM
Subject: [TechAssist] Re: Zenith 27" TV Model: SR2552S Chassis: 9-1558
Horizontal lines at top of screen
>
> You wouldn't happen to know which cap number specifically would you?
There
> are three very large caps near the b+ adjust. I replaced all three. No
> improvement.
>
> -Chris
> ----- Original Message -----
> From: "albert marquardt" <ampm@xxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Friday, November 02, 2001 5:22 PM
> Subject: [TechAssist] Re: Zenith 27" TV Model: SR2552S Chassis: 9-1558
> Horizontal lines at top of screen
>
>
> >
> > check your b+ filter cap to the vertical section, fixed a lot of zeniths
> > with folover with that cap.
> > al marquardt
> > ampm@xxxxxxx
> > ----- Original Message -----
> > From: slvrfx <slvrfx@xxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Friday, November 02, 2001 12:04 PM
> > Subject: [TechAssist] Zenith 27" TV Model: SR2552S Chassis: 9-1558
> > Horizontal lines at top of screen
> >
> >
> > >
> > > I have a Zenith 27 inch model SR2552S TV. The chassis number is
9-1558.
> > > There are horizontal white lines at the top of the screen. I looks
like
> > > part of the top of the picture is rolling back downward. The size of
> the
> > > area starts off at about 3 inches, then as the TV warms up, shrinks to
> > about
> > > 1 inch.
> > >
> > > Is there a connection that is bad on this chassis, or maybe a resistor
> > > changing value with heat?
> > >
> > > Thanx for the help.
> > >
> > > Help make your TechAssist online repair tips
> > > database better! Submit your fixes here:
> > > http://www.circuitwork.com/techassist/tip/#tips
> > > To unsubscribe write to:
> > > techassist-request@xxxxxxxxxxxxx
> > > with unsubscribe in the subject line.
> > >
> >
> > Help make your TechAssist online repair tips
> > database better! Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with unsubscribe in the subject line.
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
>
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
