they are by the vertical heat sink one in front and one in back both 2200/35 and 50 vdc fuzzzzzz ----- Original Message ----- From: "slvrfx" <slvrfx@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, November 02, 2001 4:16 PM Subject: [TechAssist] Re: Zenith 27" TV Model: SR2552S Chassis: 9-1558 Horizontal lines at top of screen You wouldn't happen to know which cap number specifically would you? There are three very large caps near the b+ adjust. I replaced all three. No improvement. -Chris ----- Original Message ----- From: "albert marquardt" <ampm@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, November 02, 2001 5:22 PM Subject: [TechAssist] Re: Zenith 27" TV Model: SR2552S Chassis: 9-1558 Horizontal lines at top of screen > > check your b+ filter cap to the vertical section, fixed a lot of zeniths > with folover with that cap. > al marquardt > ampm@xxxxxxx > ----- Original Message ----- > From: slvrfx <slvrfx@xxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, November 02, 2001 12:04 PM > Subject: [TechAssist] Zenith 27" TV Model: SR2552S Chassis: 9-1558 > Horizontal lines at top of screen > > > > > > I have a Zenith 27 inch model SR2552S TV. The chassis number is 9-1558. > > There are horizontal white lines at the top of the screen. I looks like > > part of the top of the picture is rolling back downward. The size of the > > area starts off at about 3 inches, then as the TV warms up, shrinks to > about > > 1 inch. > > > > Is there a connection that is bad on this chassis, or maybe a resistor > > changing value with heat? > > > > Thanx for the help. > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.