Ed, Check the flat cables that hook between modules, socket end on board develop cracks... Bob, Bobs TV Worcester, ma woodman1@xxxxxxxx Main 508-853-1482 Fax 508-853-1480 ----- Original Message ----- From: "Manager-Radio Doctor-Laplace" <laplace@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, January 27, 2003 2:59 PM Subject: [TechAssist] Zenith 27" SF2799Y 9-822 sync problem > Hi all, > This Zenith 27" TV SF2799Y, 9-822(pwr/sweep), 9-825(main), came in dead, I replaced C3407 and repaired power supply, now the tv comes on but the picture is shifted to the right about 4", and there is no sync for the first few minutes. On other Zenith chassis the C2212, 22uf16V cap repaired many sets with sync problems, but this set doesn't have C2212. > Any help please. > > Ed Roeser > Radio Doctor, Laplace, La. > laplace@xxxxxxxxxxx > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html