[TechAssist] Re: ZENITH T.V model SMS 1917SG NO SOUND
- From: "Keith Trumbla" <ktrumbla@xxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Mon, 21 Jan 2002 18:06:40
Hi Moses, Scope pin 1 of ICX1200. This is the drive to your output stage.
Also pin 56 is your DC volume control, make sure it varies as your on-screen
bar graph increases. MY schematic shows a nominal voltage of 2V at this pin.
Regards,
Keith
>From: "Moses Ramlochan" <indu@xxxxxxxxxxx>
>Reply-To: techassist@xxxxxxxxxxxxx
>To: <techassist@xxxxxxxxxxxxx>
>CC: "Moses Ramlochan" <indu@xxxxxxxxxxx>
>Subject: [TechAssist] ZENITH T.V model SMS 1917SG NO SOUND
>Date: Sun, 20 Jan 2002 22:54:56 -0400
>
>Hello everyone
>I have a Zenith T.V model no: SMS 1917SG with no sound .The output stage is
>working and I.F. stage. But still their is no sound. If you adjust the
>volume you see the bars going up and
>down on the pixture showing the volume adjusting....
>have NO INFO.
>
>
>
>MOSES ELECTRONIC SERVICES
>#46 Golconda settlement
>San Fernando
>Trinidad
>TEL /FAX 868 653-3637
>e mail = indu@xxxxxxxxxxx
>
>------------------------------------------
>Make your TechAssist database better!
>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>------------------------------------------
>To UNSUBSCRIBE your email address, click here:
>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>Or send a BLANK email with unsubscribe in the
>SUBJECT field to the address above.
>
Keith Trumbla
O/O B.E.M Electronics Est.1954
839 Ellice ave.
Winnipeg Manitoba, Canada R3G 0C3
Ph.(204)775-2875 Fax(204) 774-9192
_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
