If I put a 8 ohm resistor across a 16 ohm speaker can I use it for this set? I'm not up on audio problems. Can I just use the 16 ohm without putting a resistor across it? Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "al m" <ampm@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, October 26, 2004 9:59 AM Subject: [TechAssist] White Westinghouse WTV12505 speaker or # needed. >I need a speaker for this set. It is a 31/2 X 2" speaker 2W 8 ohms. It has > flush mounting and the center holes are 3' and 1 9/16. Markings on speaker > are SP5090F04 K tone 76205 > Al Marquardt > ampm@xxxxxxx > Al Marquardt Electronic Repair > 206 W Main > Girardville Pa. 17935 > > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/